Showing posts with label Tutorials. Show all posts
Showing posts with label Tutorials. Show all posts

Sunday, March 22, 2020

NEW The Creative Tutorial Collection - Ornate Garden Suite

Hello Stampers!
The Creative Tutorial Collection - Ornate Garden Suite - is compiled of (8) project tutorials in PDF format featuring projects created from the Ornate Garden Suite of Stampin' Up! products available April 1, 2020.  These full-color step-by-step instructions also include product lists to make it easier than ever to recreate these exclusive projects - you won't find them anywhere else!


Ornate Garden PDF $15.00


PDF will be emailed upon payment confirmation.

Have a creative day!
Live, Laugh, Love and STAMP!
~Barbara

Monday, February 22, 2016

Tutorial for One Sheet Tote Bag Treat Holder

I love this little treat holder that looks like a purse or a tote bag.  I made this one for the Stampin' Friends Blog Hop, you can see that post HERE. 














In that post I said I would post a tutorial on how you can make your own treat holder.

THINGS YOU WILL NEED:
Simply Scored Scoring Tool and Stylus
Ruler and Scoring Stylus
Tear & Tape Adhesive
Fast Fuse Adhesive
1 sheet of 8-1/2" x 11" Cardstock, I am using Sahara Sand
Designer Series Paper, 2 pieces cut to 3-1/2" x 4-1/4"
Cardstock for Trim, 2 pieces cut to 5/8" x 4-1/2"
Cardstock for Handles, 2 pieces cut to 5/8" x 8-1/2"
Candy Dots Brad Bases
Pearl Basic Jewels
Handheld 1/8" Hole Punch
Paper Snips
Circle Stick on Velcro Fastener 

INSTRUCTIONS:
Score on long side at 3/4", 4-1/2", 6-1/2", 10-1/4"
Turn paper to short side and score at 2", 6-1/2"
Measure 2" from the 4-1/2" & 6-1/2" score lines and score diagonally to the edge
I have drawn lines to show you where to score, score both sides of paper


Fold on all score lines
 Fold the diagonal score lines

Apply Tear & Tape Adhesive from the diagonal score line to the corner on all 4 sides

Adhere edges down and secure

Fold the center two score lines to form the box bottom

Bring the top two edges together and pinch in the sides of box

Ready to decorate and embellish
Here is what I used to finish mine
Add brads to handles and a velcro fastener to the inside



All finished! What do you think? 
I hope you will be inspired to create your own One Sheet Tote Bag Treat Holder.  Thanks for stopping by today,   please take a moment to leave a comment if you wish.  I love reading comments.

Live, Laugh, Love and STAMP!
~Barbara

Wednesday, September 30, 2009

Tissue Pack Wrap Tutorial

TISSUE PACK WRAP TUTORIAL
By Barbara Welch, Creative Stampin' Spot

As I promised yesterday, the Tutorial is ready to go. I was inspired by a demonstrator at convention who made these. I basically measured the pack of tissues I purchased and then made my pattern

Things you will need:

Stamp Sets I used Snow Buddies, Serene Snowflakes, Teeny Tiny Wishes
Ink: Basic Grey, Bashful Blue
Markers: Bashful Blue, Certainly Celery, Only Orange
Cardstock:
Base (Bashful Blue shown) 4-1/2" x 8-1/2"
Whisper White layer (shown stamped with snowman) 1-5/8" x 1-7/8"
Brocade Blue layer 1-3/4" x 2"
Accessories:
Ribbon - 15"
Pocket Pack of Tissues
Scoring Tools
SNAIL adhesive
Dimensionals
Sticky Strip
Paper Snip
Scallop Oval or Large Oval Punch

Begin by cutting the Bashful Blue Cardstock to 4-1/2 x 8-1/2"

If using a scoring board, score along the 8-1/2" edge as follows:
2" - 3" - move left edge of paper to 1/4" mark and score at 5-1/2" - 6-1/2"













If using a Bone Folder with a ruler, use the marks on the grid paper, score along the 8-1/2" edge as follows:
2" - 3" - 5-1/4" - 6-1/4"















Stamp the Snowflake images using Bashful Blue Ink onto the Bashful Blue cardstock. I used the three different images and did random stamping all over.















Use an Oval Punch to punch an opening in the center of the largest end panel (2-1/4")














Place sticky strip on the underneath (unstamped) side along this edge.















Place Ribbon in the middle portion of the cardstock and tie a knot on top closer to the right side.















Stamp the "get well wishes" under the knot but above the score line.

Fold along all score lines; using a pencil, mark where the oval should be punched on the other end panel.















Punch the oval.














Now you are ready to assemble















Place the tissue pack in the center















Fold the shortest end in first














Remove the protective cover from the sticky strip adhesive















Then fold the largest (2-1/4") end over on top of the smaller panel and making sure to align the ovals. Press to adhere.














Here is the front/top view














Here is the back view with the tissues pulled through














I stamped the snowman in Basic Grey and colored in the images with markers.
Then mounted this onto the Brocade Blue layer. Using Stampin' Dimensionals, adhere this to the top over the ribbon.

Thanks again for stopping in to check out my tutorial for making the TISSUE PACK WRAP.
Did you like this tutorial? Please leave a comment for me if you did.
I would love to see what you create using my tutorial, please leave a comment with a link to the location for me to take a look.

Live, Laugh, Love and STAMP!!!
~Barbara

Thursday, February 26, 2009

Glass Plate and InsertsTutorial

Thanks to everyone for your wonderful comments and emails asking me how to make these. I originally showed my Glass Plates with seasonal inserts in December. I was inspired to make these at the SU! Convention in August 2008.
Today, I have prepared this tutorial to share with you, so you can create your own. I purchased the dinner size glass plates at WalMart. You will need to have your plate before making your templates for the inserts as they may be different in size than mine.
















SUPPLIES YOU WILL NEED
Dinner size Glass Plate, Decorator Plate Stand,
Kraft Card Stock, Velcro (adhesive back), Scissors, Pencil,
Designer Series Paper, Cardstock, Inks, Embellishments, Ribbon, Punches

MAKING YOUR TEMPLATES
Step 1 - Make your templates by tracing around the base (part of the plate that rests on the table) of the glass plate onto cardstock, I used Sahara Sand for one and Kraft for one.














Step 2
- Cut 2 of these templates. Make one template 1/4" smaller in diameter, by trimming 1/4" off one of the circles.














Step 3 - Here are the finished templates you will use these for making the inserts. I have mine labeled - outside layer is the one that is the size of the bottom of your plate, top layer is the one that is 1/4" smaller in diameter. Now fold in half, then half again and continue until you have 8 triangle sections. This serves as a cutting guide for the layers. I drew a line across the center of mine as seen in the photo below.














Step 4 - Templates, Glass Plate and Velcro - now you are ready to create inserts for your plate.















HOW TO MAKE INSERTS

Step 1 - For each insert you make, first cut 1 base out of cardstock ( I used Kraft here) using the Top Layer template as a guide. Trace and cut out.














Step 2 - Then fold the template in half and trace onto your first layer (I used Delicate Dots DSP here).



















Step 3 - Flip template over using the other side as a guide for the lower half. Then cut one Outside Layer (here I used Bashful Blue). Here are the pieces all cut out and ready to assemble. Once assembled this will be a very stable insert to go onto the glass plate.














Step 4 - Now you can assemble the pieces, stamp and embellish as desired. I used the Good Egg Set and several accessories to complete my insert.




















HOW TO APPLY INSERT TO PLATE

Step 1 - To adhere the insert to the glass plate, apply two 1-1/4" pieces of the rough side of self-adhesive Velcro to the glass plate as shown in the photo.














Step 2 - Attach two 1-1/4" pieces of the soft side of the self-adhesive Velcro to the top of the Velcro pieces already adhered to the plate. Peel away the tab to expose the adhesive on both pieces of Velcro.

















Step 3
- Place the insert down on top of the Velcro pieces and press to adhere. Here is what it will look like once done and you separate the Velcro to remove the insert.





























Step 4 - The photo below shows what the back of the insert will look like with the tabs in place.
To remove insert from plate, gently separate the two pieces of Velcro. Repeat step 2 when making another insert for the plate, adding the soft side of the Velcro to each insert, this allows
them to be interchangeable.















FINISHED PLATE WITH EASTER INSERT


















Thanks for stopping by and have a creative day!
~~Barbara

Wednesday, January 7, 2009

Ribbon Bow Tutorial

Do you want to learn how to make this fluffy ribbon embellishment! I have created this tutorial to show you how I make them.













I was reading a forum on SCS and many were inquiring of how to make a ribbon embellishment like this. I used to make these years (15 - 17 years) ago for my daughter's hair, shoes, clothing - anywhere I wanted a "fluffy" bow. I learned to make these at a small town craft store in West Virginia where we lived when our children were small. The lady that worked there was always showing how to make things, and she knew Kelsey and how I loved to always make her hair bows and shoe bows to match. I would go there to buy the ribbons.

Supplies you will need:
Stampin' Up! Grid Paper or Flat Ruler
2 yds of 3 different Ribbons or Scraps of Ribbons
12" piece DMC Floss
Sharp scissors for cutting ribbon

Here is a close-up of the Ribbon Bow

















Step 1
Lay ribbon on grid paper or flat ruler. Cut 6 pieces of each ribbon design in 3" pieces. Cut all ends at an angle to prevent fraying.










Step 2
Cut 6 pieces of each ribbon design in 2" pieces.
Cut 6 pieces of each ribbon design in 2-1/2" pieces. Cut ends at an angle to prevent fraying.










Step 3
Lay a 12" piece of DMC floss on grid paper or flat surface. Start layering your ribbon pieces on top of floss, beginning with 2" pieces, then add 2-1/2" pieces and the top layer will be 3" pieces.









Step 4
Bring up ends of the DMC floss and tie around all layers of the ribbons. Tie very tight so the ribbons will not slip out.










Step 5
Hold the ribbons in one hand and fluff the other side with the other hand, separating the layers as you go.










Step 6
This is after fluffy both sides, tie tightly around the bow again with the remaining ends of the DMC floss. Trim ends of floss close to the knot.











Step 7
With the ribbons in your hand, hold the bottom of the bow and push the top portion down toward the center. The smallest pieces of ribbon will be in the center and this will help form the fluffy bow.
Trim the ends of the ribbons, if needed, with scissors to form the shape you desire.






I hope this helps you to make these adorable fluffy bows. You can use them on cards, presents, gift bags, frames, and for children's hair as I used to do many, many years ago.

Leave a comment and let me know what you think.

Thanks for stopping by and have a creative day!
~~Barbara